امکانات:
شارژر کنترلر stea آلمان
از رنج 10 آمپر الی 30 آمپر
در دو سری PR و Solarix MPP 2010
…
Project Description
- 1
- می 22, 2017
- انرژی های نو, شارژر
اطلاعات بیشتر
Solar Charge controller
Steca PR
The Steca Pr charge controller are the fifth generation of charge controller technology ( up to 900 Wp0 . this state of the art product upgrades the Steca Solarix series by a customer designed LCD which shows the accurate state of charge
( SOC) in percent and battery gauge symbol . the heart of controller is the integrated circuit called ATONIC , which contains the improved regulation software based on a self learning algorithm .
Steca PR | 1010 | 1515 | 2020 | 3030 |
System voltage | 12V(24V) | |||
Max input voltage | 47V | |||
Max . module input short circuit current | 10A | 15A | 20A | 30A |
Max . load output current | 10A | 15A | 20A | 30A |
Max self consumption | 12mA | |||
End of charge voltage(float ) | Liquid 13.9V(27.8V);gel 14.1V(28.2V) | |||
Boost charge voltage;2h | 14.4V(28.8V) | |||
Equalization charge(deactivated for gel accu);2h | 14.7V(29.4V) | |||
Reconnection setpoint (SOC/LVR) | >50 % / 12.6 V (25.2 V) | |||
Deep discharge protection (SOC/ LVD) | < 30 % / 11.1 V (22.2 V) | |||
Ambient temperature | -10 °C … +50 °C[14 °F … 122 °F] | |||
Terminal size (fine / single wire) | 16 mm2 / 25 mm2 - AWG 6 / 4 | |||
Enclosed protection class | IP32 | |||
Weight | 350g[0.77lbs] | |||
Dimension (l x w x h) | 187 x 96 x 44 mm[7.4 x3.8 x1.7 inch] | |||
MPP-Tracker
Steca Solarix MPP2010
The new Steca charge controller Solarix MPP2010 is a Maximum
Power Point Tracker to optimally charge batteries. It is specially designed to connect PV-modules which are used in grid-connected system .it is simple and reliable device providing maximum flexibility in module configuration. it is also possible to use thin film modules with device .the latest technology grantees professional battery care combined with modern design and outstanding protection features.
Steca Solarix MPP 2020 |
|
|
Nominal battery voltage | 12V | 24V |
Module input voltage range | 17V…100V | |
Maximum battery charging current | 20A | |
Maximum module power | 250W | 500W |
Maximum load current | 10A | |
Maximum efficiency | 97% | |
Float charge voltage | 13.9V | 27.8V |
Boost charge voltage | 14.4V | 28.8V |
equalization charge voltage | 14.9V | 29.8V |
Self consumption | 10mA | |
Ambient temperature range | -25 °C … +50 °C[-13 °F … 122 °F] | |
Terminal size (fine /single wire ) | 16mm²/25mm²[AWG 6/4] | |
Ingress protection | IP20 | |
Programmable | Remote-control Steca PA RC 100 | |
Weight | Ca .0.9 kg[1.98lbs] | |
Dimension (l x w x h) | 190 x150 x70mm[ 7.5 x5.9 x2.7inch] | |
